Redesigned Triumph 955i Stator. This unit has a higher output capacity than the OEM unit, and will meet or exceed all factory specifications. You will have to re-use your old grommet and pulser coil (see photo)This stator comes with solder terminal kit (not a connector as shown below)
*Please check your wire length measurement: If your gromment to connector wire length is 29 inches then this is the correct stator. If your wire length is 12 inches then you need our part number 21-002.
This stator might work for other 955's years; check the measurements below.Outside diameter in mm = 115mmInsider diameter in mm = 42mmThickness of the inside ring (where the bolts go through) is 21mm